Closed Circuit Cross Flow Cooling Tower
KEJU closed circuit cross flow cooling tower is an advanced cooling system that efficiently removes heat from machinery or other processes in a closed loop system. This type of closed cooling tower is highly efficient and reliable, with a low risk of contamination and minimal water consumption.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Products Description
KEJU closed circuit cross flow cooling tower is an advanced cooling system that efficiently removes heat from machinery or other processes in a closed loop system. This type of closed cooling tower is highly efficient and reliable, with a low risk of contamination and minimal water consumption. It can be used in a wide range of applications, including power plants, manufacturing facilities, and data centers.
Process Principle
* Internal Circulation Water System
The circulating water cooled in the coil flows out of the tower body and is sent to the heat source (cooled equipment) by the system circulating water pump. The circulating water heated by heat exchange enters the coil for cooling.
* External Circulation Water System
After the external spray water cools the circulating water inside the coil by contacting with the coil and the filler for heat exchange, it falls into the lower water tank and is sent to the spray water tank by the spray water pump for recirculation.
The internal circulation cooled water exchanges heat and mass with the spray water and air outside the tube through the coil, avoiding water pollution caused by direct contact between the cooled water and the air. Since the spray water is pre-cooled by the PVC filler, its heat exchange effect is more obvious.
Features & Advantages
* Low Noise: PVC filler makes the work efficient and reduces the noise of spraying water droplets. Equipped with low-noise fans.
* Avoiding Scaling: The temperature of the spray water is lower than the scaling temperature, the cooling coil flows smoothly, the coil is fully damped, and scaling is greatly reduced.
* Convenient Maintenance: Modular design, easy to assemble, disassemble and maintain. There is a maintenance channel in the tower, equipped with maintenance ladders and fences. It is convenient for staff to enter and exit for inspection and maintenance.
Project Reference of Closed Circuit Cross Flow Cooling Tower
Hot Tags: closed circuit cross flow cooling tower, China closed circuit cross flow cooling tower manufacturers, suppliers, factory, cross flow cooling tower, Cross Flow Closed Cooling Tower, Cross Flow Closed Circuit Cooling Tower, Counter Flow Closed Type Cooling Tower, Steel Open Water Cooling Tower, cooling tower parts
