Induced Draft Counter Flow Closed Cooling Tower

 

KBL series induced draft counter flow closed cooling tower is an advanced cooling system that can effectively reduce the temperature of the water used in various industrial processes. This countercurrent closed cooling tower is designed with an induced draft fan, which creates a negative pressure inside the cooling tower. This helps to improve the overall efficiency and effectiveness of the cooling process, as the hot air is quickly removed from the system and replaced with cooler air. Its environmentally friendly design and reliable operation make it a popular choice for many industries today.

 

 

 

As counter flow closed cooling tower, the dry cool air is inlet through louvers on both sides of the tower from the bottom, and drawn upwards passing a large heat exchange surface of the coils section under the induced fans, against the spraying water in the opposite way, becoming hot wet air, induced draught out of the tower into the atmosphere by the fans on the top. During this process, a part of the heat from the fluids inside the closed loop is transferred efficiently, and removed to the outside environment.

 

 

* Compact structure, small footprint, can be used in combination with multiple units, meet various water volume, size, temperature difference requirements, suitable for conventional cooling projects.

* Water collector, control the running drifting rate ≤ 001%.

* The box adopts closed circulation to prevent debris from entering the tower and causing spray blockage.

* The cooler adopts anti-freeze and energy-saving design. When the temperature is low in the northern region, the circulating water is definitely emptied to avoid freezing damage.

* Dual-circuit circulation can be designed according to the needs of user equipment. Even if one loop fails, the other loop can still operate normally.

* The cooling medium is closed and circulated, no impurities enter, and the purity of the medium is determined.

* The deep water tray at the bottom of the tower ensures sufficient water supply to the circulating water pump, and the pump will not run idle.

 

 

Model	Cooling Capacity (Kcal/h)	Working Flow (m³/h)	Dimensions (L*W*H) (mm)	Inlet and Outlet Diameter
KBL-05	150000	30	2800x1870x2450	DN80
KBL-06	180000	36	2800x1870x2450	DN80
KBL-07	225000	45	3400x1970x2600	DN100
KBL-08	260000	52	3400x1970x2600	DN100
KBL-09	300000	60	3400x1970x2600	DN100
KBL-10	350000	70	3400x1970x3250	DN125
KBL-12	400000	80	3400x1970x3250	DN125
KBL-13	450000	90	3400x1970x3250	DN125
KBL-14	500000	100	3400x2340x3250	DN125
KBL-15	550000	110	3400x2340x3250	DN125
KBL-16	600000	120	4200x2340x3350	DN150
KBL-17	650000	130	4200x2340x3350	DN150
KBL-18	700000	140	4200x2340x3350	DN150
KBL-19	750000	150	4200x2340x3350	DN150
KBL-20	800000	160	4800x2340x4200	DN200
KBL-21	900000	180	4800x2340x4200	DN200
KBL-22	1000000	200	4800x2340x4200	DN200
KBL-23	1100000	220	4800x2340x4200	DN200
KBL-24	1200000	240	5350x2340x4300	DN200
KBL-25	1300000	260	5350x2340x4300	DN200
KBL-26	1400000	280	6100x2340x4250	DN250
KBL-27	1500000	300	6100x2340x4250	DN250
KBL-28	1700000	340	5350x3200x4650	DN250
KBL-30	1900000	380	5350x3200x4650	DN250
KBL-32	2100000	420	5800x3200x4650	DN250
KBL-34	2500000	500	6500x3200x4700	DN300
KBL-36	2800000	560	6500x3200x4700	DN300

Note: The above technical parameters are for reference only: because the products are constantly updated and optimized, the parameters are subject to change without prior notice.

 

 

According to different technical requirements of customers, KEJU can provide you with specialized non-standard designs.

 

 

 

Hot Tags: induced draft counter flow closed cooling tower, China induced draft counter flow closed cooling tower manufacturers, suppliers, factory, Steel Open Water Cooling Tower, Cross Flow Steel Open Cooling Tower, open circuit cooling tower, Countercurrent Closed Cooling Tower, Counter Flow Closed Water Cooling Tower, Closed Circuit Counter Flow Cooling Tower